KW Rating: 12.5 KW at 60 HZ - 10.5 KW at 50 HZ. Kubota Diesel Engine, Single Bearing Direct Coupled Generator with 1% Solid-State Voltage Regulation and Low 1,800 RPM Operating Speed. Also, counts with a Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure. 5-Year Limited Warranty.
Phasor - K4-12.5kW Kubota Diesel Engine - 12.5kW (60 Hz) Marine Diesel Generator
Standard Features
- Kubota Diesel Engine
-
Single Bearing Direct Coupled Generator
- ± 1% Solid-State Voltage Regulation
-
Low 1,800 RPM Operating Speed
-
Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure
-
Single Series Circuit Control System with No Printed Circuit Boards – Tinned Wiring
-
Fresh Water Double Pass Heat Exchanger
-
Water Cooled Exhaust Manifold with Removable Integral Cupro-Nickel Heat Exchanger Core
-
Zinc Anode in Heat Exchanger
-
Stainless Steel Exhaust Elbow Cast
-
Gear Driven Raw Water Pump
-
Four Point Isolation Mounts S/S
-
Molded Blue Silicone Water Hoses with Stainless Steel AWAB Clamps
-
Air Intake Cleaner / Silencer
-
Spin-On Lube / Fuel Filters
-
Secondary 5 Micron Fuel Filter
-
Self Bleed Fuel System
-
USCG Approved Fuel Lines
-
Electric Fuel Transfer Pump
-
Forged Brass Oil Drain Valve with Safety Lock
-
Awl-Craft 2000 Urethane Finish
-
5 Year Limited Warranty
-
Circuit Breaker - Single Phase
-
Belt Guard
Specifications
| Kubota Model | V1505-E4BG |
| Number of Cylinders | 4 |
| KW Rating at 60 Hz | 12.5 Kw |
| KW Rating at 50 Hz | 10.5 Kw |
| Cubic Inch Displacement | 91 |
| Fuel Consumption ( Gal/Hr ) | Full Load 1.03 Half Load 0.62 |
| Electric End | Linz |
| Bore x Stroke | 3.07" x 3.09" |
| Dimensions (LxWxH) without enclosure | 34.5" x 18" x 23.5" |
| Dimensions (LxWxH) with enclosure | 39" x 23" x 25.5" |
| Weight (lbs.) | 567 |
| R.P.M | 1800 |
| Output (volts) | 120/240 |
| Output (amps) | 104/52 |
| Output (watts) | 12,500 (12.5 KW) at 60 HZ - 10,500 (10.5KW) at 50 HZ |
| Exhaust Dia. | 2.0" |
| Raw Water Dia. | 3/4" |
| Fuel Line Dia. | 5/16" |
| Return Line Dia. | 3/16" |
Recommended Oil:
- 5w-40 Full Synthetic Oil
Optional Equipment
- Start - Stop - 20ft Harness
- Custom Remote Engine / Generator Instrument Panels
- DC Gauge Panel - 20ft Harness
- Stainless Steel Drip Pan
- Three Phase Generator Output
- Custom Front PTO Pulleys
- 24 Volt Starting System
- 50 Cycle Output
- Dedicated Motor Starting Generator Windings
- Sound Insulation Blanket
- Sound Attenuated Enclosure
- Powder Coated Aluminum
- Remote Oil Filter Kits
- BALMAR High Output Alternator
- Custom Chrome Packages
- Spare Parts Kit
Included With The Spare Parts Kit:
| 101-0084 |
1 x Duffle Bag with Phasor Marine Logo 2 x Kubota Oil Filters 2 x Kubota Fuel Filters 1 x Temp Switch 1/2 Plug 1 x Oil Pressure Switch w/Plug 1 x Kubota Thermostat gasket 1 x Kubota Thermostat Assy 1 x Phasor Heat Exchanger Oring 1 x 1/4 NPT 5/16 x 1 Zinc 1 x Impeller 302M for Oberdorfer Pump 1 x Oberdorfer Pump O-Ring 1 x Kubota V-Belt 2 x LP1 HE Neo Washer |
5-Year Limited Warranty
