Kubota 3.5 kW Marine Diesel Generator (60 Hz) by Phasor - Kubota Diesel Engine, Heavy Duty Syncro-Cogged Timing Belt Drive System, and Slower 2,800 RPM Operating Speed for reduced noise and vibration. Also, counts with a Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure. 5-Year Limited Warranty. 4 Gauge remote panel will not work with this generator
Phasor LP1-3.5 kW - Kubota 3.5 kW (60 Hz) Marine Diesel Generator
Standard Features
- KUBOTA 3.5 kW (60 Hz) Marine Diesel Generator
- Heavy Duty Syncro-Cogged Timing Belt Drive System
- Four Point Stainless Steel Isolation Mounts
- Automatic Low Oil Pressure And High Coolant Temperature Safety Shutdown
- Single Circuit Control System with no Printed Circuit Boards or Relays
- Fresh Water Heat Exchanger Cooling System
- Cast Bronze Heat Exchanger Tank with Removable End Caps
- Zinc Anode in Heat Exchanger
- Belt Driven Impeller Type Raw Water Pump
- Stainless Steel Water Cooled Exhaust Riser
- 12 Volt Electric Fuel Pump
- Remote 12 Volt Electric Key Switch with Preheat, Start, Run and Stop Positions
- Integral Terminal Strip Connection for Remote Start System and A/C Termination
- Main Line Circuit Breaker
- Forged Brass Oil Drain Valve with Safety Lock
- Air Intake Cleaner/Silencer
- USCG Approved Fuel Lines
- AWL-CRAFT 2000 Urethane Finish
- Slower 2800 RPM Operating Speed For Reduced Noise and Vibration
-
Limited 5 Year Warranty
Specifications for LP1-3.5 KW (60 Hz) Marine Diesel Generator
| Kubota Model | EA300NB |
| Number of Cylinders | 1 |
| Cubic Inch Displacement | 19.0 |
| 3.5kW | 60 Hz |
| Bore x Stroke | 7/2800 |
| Fuel Consumption (Gal/hr) | Full Load: 0.35, Half Load: 0.18 |
| Electric End | Sincro |
| SAE net intermittent (HP/rpm) | 39.5" x 21.0" x 26.0" |
| Combustion system | Spherical |
| Compression ratio | 23 to 1 |
| Fuel injection pump type | Bosch "mini" type |
| Nozzle type) | Bosch "throttle" type |
| Cooling system | Freshwater heat exchanger |
| Lubricating system | Forced lubricating by trochoid pump |
| Fuel. | ASTM #2 diesel or equivalent |
| Lubricating oil | Quality better than API service CC class |
| Lubricating oil capacity (US Qt) | 1.0" |
| Measurement w/o Soundshield (L x W x H) in. | 28" x 16" x 15" |
| Measurement w/ Soundshield (L x W x H) in | 31.5" x 20" x 20" |
| Dry weight w/o Soundshield | 185 lbs. |
| Dry weight w/ Soundshield | 215 lbs. |
| Starting system | 12V Battery |
| Fuel line dia. | 5/16" |
| Return line dia. | 3/16" |
| Raw water dia. | 5/8" |
| Exhaust dia. | 1 1/2" |
| Output Voltage | 120/240 |
| Output Amps | 30/15 |
| Output Watts | 3500 |
Recommended Oil:
- 5w-40 Full Synthetic Oil
Optional Equipment
-
Custom Remote Engine Instrument Panel
-
120 Volt Electric Remote Raw Water Pump
-
Heavy Duty Air Intake Silencer
* Sound Insulation Blanket -
Stainless Steel Drip Pan
-
50 Cycle Output
-
± 1% Voltage Regulation for Users with Integrated Inverter Systems
-
Spare Parts Kit
-
Enclosure Sound Attenuated
-
Powder Coated Aluminum
Included With The Spare Parts Kit:
| 101-0080 |
1 x Duffle Bag With Phasor Marine Logo 1 x Capacitor 1 x 10 Micron Element - Racor Fuel Filter Separator 1 x Oil Pressure Switch w/Plug 1 x Temp Switch 1 x 1/4 NPT 5/16 x 1 Zinc 1 x Impeller LP1-2 for Oberdorfer Pump 1 x Belt RWP 1 x Belt, LP1-3.5 2 x LP1 HE Cap rubber 2 x LP1 HE Neo Washer |
5-Year Limited Warranty
.jpg)
